Cheetah Mounts APSAMB Tilt and Swivel Articulating Arm for Plasma LCD TV 32″-55″


I purchased this mount for a 32in Phillips flatscreen. The mount is heavy, sturdy and exactly what I was looking for. The only problem was the mounting hardware that came with it. The wall anchors were cheap and did not hold in the wall very well. This was a fairly easy fix by a trip to the local hardware. Then another surprise, the screws that were sent to attach the TV to the mount were not the right size. This resulted in another trip to the hardware. Now another issue. The only screws that would fit the TV screw holes were too short. Now I had to shorten the plastic mounting spacers that came with the unit. Good thing I have a bench grinder. A little adjustment to the length and they all screwed in fine.

Overall this is a great mount. You can’t beat the price. It sits level, even at an angle in a corner. It is solid and heavy. I don’t have to worry about the TV falling off the wall or the mount. But a word of advice. Be prepared to go to the hardware for more mounting anchors and screws. (In my opinion 4 were not enough.) Also check the screws and spacers before putting the TV up on the mount. It will save you a few headaches and a trip or two to the hardware.

Feature

  • Collapses to less than 4″ from the wall
  • Extends to a full 26″ from the wall
  • High quality powder coat finish
  • Built-in bubble level in wall plate
  • Dual safety screws to lock TV Position

Overview

The APSAM universal articulating arm mount supports virtually any display up to 55″ with hole patterns up to 27.7″ horizontally and 19″ vertically. The APSAM also features a full 27″ of extension and up to 150 degrees of rotation for larger displays, it also folds to a low 3.5″ profile as has +/-15 degrees of tilt. The APSAM mount is designed with a lift and lock design for ease of installation and is constructed with a 17″ wall plate which is specifically designed for installation to standard 16″ studs. The APSAM is well constructed with 27 LBS of 100% High Grade Steel providing a sturdy and reliable mount.

List Price

Offer Price

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Feb 06, 2010 10:25:09

Friends Link : Samsung ln lcd

Comments

DigiTV Digital Plasma and LCD TV Articulating Arm Tilting Wall Mount. Universal Design for 34″ to 56″ Displays (Black)


I bought this mount back when it was silver for a closeout price, and I feel like I got the best possible choice for the money. Even now, at more for the same thing, I would buy again if I found another 46″ LCD on the sidewalk.

It does sag a little bit, but it’s wrong to blame that on the fact that it’s less expensive than other models. That’s just plain stoopid. It sags with respect to how far away from the wall it extends, as a DIRECT result of the law of torque, not the quality or the design. It simply extends further out from the wall than other comparable models do, becuase it’s supposed to support corner mounting, which it does. Other models sag the same amount at the same distance from the wall.

You don’t need a studfinder or a magic wand to find the center of the studs. You just need a little 1/16 or 1/8 drill bit. Tap on the wall, guess where the stud is, and start poking little holes until you find the edges of the stud. That back plate is going to cover all your “experimental” pilot holes unless you’ve been drinking tequila all day and drill the wrong wall. Predrill your actual studs before tapping the lags or you’ll be sorry, the lag screws can split them if you don’t. If you think there’s a chance you have steel studs on your mounting wall, don’t buy this or any other wall mount. Buy a floorstanding model or find a realtor.

Feature

  • Single arm Swivel 180 degree and Tilt 15 degree
  • Universal Design Fits Most 32″-56″ Display Up To 110LBS
  • Arm Extend To 25″ Fold To Less Than 4″
  • Interface Size(H*W) 762 * 508mm or 30 * 20 inch
  • Support VESA 700×400 mm

Overview

Single Tilt and Swivel and Articulating Arm FLAT PANEL MOUNT FOR 32″ – 56″ PLASMA /LCD TVs A very slim profile holding your display less than 5″ from the wall with the flexibility of up and down 15 degree tilt if needed. Th mount is a solid and sturdy construction and one of the best mounts available in the market. It is easy to install and comes with minimum required tools and hardware required for installation . Professional Mount with Ultra Smooth Movement Designed for 32″ – 56″ Displays Maximum Weight Capacity: 110 lbs. (50 kg). Cantilever arm extends screen up to 25″ away from the wall. Mounting holes: 30″ wide (762mm) X 18″ tall (480mm) 19″ Wall plate supports 16″ & 18″ wall studs Durable Glossy black finish 4 Large cable pass-through holes on wall plate Arms can connect to wall plate offset left/right or center Printed instructions and all necessary mounting hardware included. Two security screws included

List Price

$499.95

Offer Price

$67.00

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Oct 18, 2009 13:26:04

Friends Link : Samsung ln lcd Samsung ln lcd Samsung Ln LCD

Comments